# Centene Corp. (CNC): stock price, chart, support and resistance levels

> Source: IndicatorStack, https://indicatorstack.com/chart/CNC. Updated Nov 20, 2026, 5:50 PM ET. Prices are indicative. General market information, not a recommendation to buy or sell any security.

## CNC at the Nov 20, 2026 close

Centene (CNC) closed at $63.78 on Nov 20, 2026, down 2.74% from the prior close of $65.58, on roughly normal volume. It opened 2.2% higher and reversed to close lower on the day.

CNC sits 69% of the way up its 52-week range of $31.63 to $78.08. It trades 5.4% below its 50-day average and 11.3% above its 200-day average. Over the past month the shares are down 10.5%. A typical day moves about 6.1% from high to low.

LiveChart’s stack bias on the 5-minute chart is bearish (strong) and has held since Nov 20, 11:05 AM ET. Compass, which reads the higher timeframes, has 0 of 5 timeframes up and 5 down. On the daily chart the bias turned bullish on Oct 20, 2026 at $70.81, and price has moved −9.9% since.

Centene Corporation operates as a managed care company that provides programs and services to under-insured families, and commercial organizations in the United States.

## Key numbers

|  |  |
| --- | --- |
| Previous close | $65.58 |
| Open | $67.00 |
| Day range | $63.29 to $67.44 |
| 52-week range | $31.63 to $78.08 |
| Volume | 7.01M (1.1× average) |
| 50-day average | $67.41 |
| 200-day average | $57.30 |
| Average daily range | 6.1% |
| Average volume (20 days) | 6.41M |
| 1-week change | −10.5% |
| 1-month change | −10.5% |
| 3-month change | −2.8% |
| Market cap | $35.28B |
| Float | 486M shares |
| Sector | Healthcare |
| Industry | Medical - Healthcare Plans |

## CNC support and resistance levels

For the next session, measured from the Nov 20, 2026 close of $63.78: resistance above, support below, nearest first.

| Side | Level | Price | From the close |
| --- | --- | --- | --- |
| Resistance | Prior session low | $63.91 | +0.2% |
| Resistance | 20-bar high, 5-minute | $64.03 | +0.4% |
| Resistance | Midpoint on Nov 20 | $65.37 | +2.5% |
| Resistance | High on Nov 20 | $67.44 | +5.7% |
| Resistance | Prior session high | $68.09 | +6.8% |
| Resistance | 20-day average | $69.48 | +8.9% |
| Resistance | 52-week high | $78.08 | +22.4% |
| Support | Low on Nov 20 | $63.29 | −0.8% |
| Support | 200-day average | $57.30 | −10.2% |
| Support | 52-week low | $31.63 | −50.4% |

## CNC technical analysis: the stack’s read

As of Nov 20, 2026, 5:50 PM ET.

- Stack bias: Bearish (strong, since Nov 20, 11:05 AM ET)
  - Bigger picture (15m to daily): down
  - VWAP and SMA: down
  - Flow: down
  - Momentum: down
  - Trend strength: down
- Compass (higher timeframes): Higher timeframes down (15m ↘  1h ↓  2h ↓  4h ↓  D ↓). Below VWAP 64.31 · below trend SMA · below yesterday’s low 63.91
- Yesterday’s high: $68.09 (+6.8% from the close)
- Yesterday’s midpoint: $66.00 (+3.5% from the close)
- Yesterday’s low: $63.91 (+0.2% from the close)
- 20-bar resistance: $64.03 (+0.4% from the close)
- 20-bar support: $63.30 (−0.8% from the close)

CNC technical analysis for Nov 20, 2026 (close $63.78; 5-minute read as of 5:50 PM ET): LiveChart’s 5-minute stack bias is bearish (strong), Compass reads “Higher timeframes down” across the 15-minute to daily charts, and the daily stack bias has been bullish since Oct 20, 2026. On the daily chart, RSI (14) is 40.0, falling (below 50) and the squeeze is fired down on the last day. On the 5-minute chart, Undertow reads sellers in control: real size behind the drop; Coil reads flat: no momentum either way; Tripwire has shorts graded Clean: nothing major in the way.

## CNC trend by timeframe

| Timeframe | Direction |
| --- | --- |
| 15-minute | Leaning down |
| 1-hour | Down |
| 2-hour | Down |
| 4-hour | Down |
| Daily | Down |

## CNC order flow, momentum and trap risk

LiveChart’s Undertow, Coil and Tripwire on the 5-minute chart as of 5:50 PM ET, then the same three on the daily chart at the close.

- **Undertow (order flow)**: Sellers in control: real size behind the drop
  - Volume: 1.3x this session’s norm · thin, size down
  - Flow: Net selling 55% over 20 bars
  - Tape: No large orders or stacking
- **Coil (momentum)**: Flat: no momentum either way
  - Momentum: RSI 47 below 50, rising · expanding up
  - MACD: Above its signal, fading
- **Tripwire (trap risk)**: Shorts graded Clean: nothing major in the way
  - Longs graded Clean: nothing major in the way
  - Levels: Resistance 64.03 · support 63.30
- **Undertow, daily chart**: Hidden buying: price lower, flow higher
- **Coil, daily chart**: Momentum fired down: volatility releasing lower
- **Tripwire, daily chart**: Longs graded Clean: nothing major in the way

## CNC technical indicators

Daily readings at the Nov 20, 2026 close; 5-minute readings as of 5:50 PM ET.

| Indicator | Value | Reading |
| --- | --- | --- |
| RSI (14), daily | 40.0 | Below 50, falling |
| RSI (14), 5-minute | 46.7 | Below 50, rising |
| Squeeze, daily | Fired down on the last day | The first bar out of a squeeze |
| Squeeze, 5-minute | Off | Bollinger Bands outside the Keltner Channel |
| MACD, daily | Below its signal |  |
| MACD, 5-minute | Above its signal |  |
| VWAP, last 5-minute bar | $64.31 | Price 0.8% below |
| Fast and slow EMA, 5-minute | $63.72 and $63.97 | Fast under slow |
| 20-day average | $69.48 | Price 8.2% below |
| 50-day average | $67.41 | Price 5.4% below |
| 200-day average | $57.30 | Price 11.3% above |
| Average daily range (ATR 14) | 6.1% | Of the price |
| Volume against its 20-day average | 1.1× | 7.01M shares |

## CNC trend history: when the daily bias turned

| Turned | Bias | Price | Held | Move while it held |
| --- | --- | --- | --- | --- |
| Oct 20, 2026 | Bullish | $70.81 | Holding, 24 sessions | −9.9% |
| Oct 14, 2026 | No clear bias | $70.16 | 4 sessions | +0.9% |
| Sep 25, 2026 | Bearish | $61.82 | 13 sessions | +13.5% |
| Jul 31, 2026 | No clear bias | $62.22 | 39 sessions | −0.6% |
| Apr 27, 2026 | Bullish | $43.51 | 66 sessions | +43.0% |
| Apr 17, 2026 | No clear bias | $38.17 | 6 sessions | +14.0% |
| Mar 16, 2026 | Bearish | $34.76 | 23 sessions | +9.8% |
| Feb 6, 2026 | No clear bias | $38.46 | 25 sessions | −9.6% |
| Sep 26, 2025 | Bullish | $34.86 | 91 sessions | +10.3% |
| Sep 11, 2025 | No clear bias | $34.08 | 11 sessions | +2.3% |
| Jun 2, 2025 | Bearish | $54.91 | 70 sessions | −37.9% |
| May 27, 2025 | No clear bias | $57.65 | 4 sessions | −4.8% |

Past readings don’t predict future results.

## CNC daily read log

| Date | Close | Change | Stack bias | Compass | Daily RSI |
| --- | --- | --- | --- | --- | --- |
| Nov 20, 2026 | $63.78 | −2.74% | Bearish | Higher timeframes down | 40.0 |
| Nov 13, 2026 | $71.27 | +1.42% | Bullish | Tailwind up | – |

## CNC stock: common questions

### What are CNC’s support and resistance levels?

Measured from the Nov 20, 2026 close of $63.78, the nearest resistance is the prior session low at $63.91 (+0.2%) and the nearest support is the low on Nov 20 at $63.29 (−0.8%). The full list for the next session is on this page.

### What is the technical analysis for CNC?

CNC technical analysis for Nov 20, 2026 (close $63.78; 5-minute read as of 5:50 PM ET): LiveChart’s 5-minute stack bias is bearish (strong), Compass reads “Higher timeframes down” across the 15-minute to daily charts, and the daily stack bias has been bullish since Oct 20, 2026. On the daily chart, RSI (14) is 40.0, falling (below 50) and the squeeze is fired down on the last day. On the 5-minute chart, Undertow reads sellers in control: real size behind the drop; Coil reads flat: no momentum either way; Tripwire has shorts graded Clean: nothing major in the way.

### Is CNC overbought or oversold?

At the Nov 20, 2026 close, CNC’s daily RSI (14) was 40.0, falling (below 50). On the 5-minute chart, as of 5:50 PM ET, it was 46.7, rising (below 50). Overbought here means 70 or over, oversold 30 or under; neither forecasts a turn.

### What is the trend for CNC on the 1-hour, 4-hour and daily charts?

As Compass read it at the Nov 20, 2026 close: 15-minute leaning down, 1-hour down, 2-hour down, 4-hour down, Daily down. Overall, Compass reads “Higher timeframes down”.

### Is CNC in a squeeze?

At the Nov 20, 2026 close the squeeze (Bollinger Bands inside the Keltner Channel) was fired down on the last day on the daily chart and off on the 5-minute chart (as of 5:50 PM ET). Coil, LiveChart’s momentum layer, boxes every squeeze on the chart and marks its release.

### Are buyers or sellers in control of CNC?

As of 5:50 PM ET on Nov 20, 2026, Undertow, LiveChart’s order flow layer, read sellers in control: real size behind the drop on the 5-minute chart (volume: 1.3x this session’s norm · thin, size down; flow: Net selling 55% over 20 bars; tape: No large orders or stacking).

### Is CNC at risk of a bull or bear trap?

As of 5:50 PM ET on Nov 20, 2026, Tripwire, LiveChart’s trap check, had shorts graded Clean: nothing major in the way on the 5-minute chart; longs graded Clean: nothing major in the way; levels: Resistance 64.03 · support 63.30. Its grades describe the structure around price; they aren’t a call on direction.

### What is Centene’s stock price?

CNC closed at $63.78 on Nov 20, 2026, −2.74% on the day. The chart at the top of this page shows the latest price while the market is open.

### Is CNC bullish or bearish right now?

As of the Nov 20, 2026 close the stack bias is bearish (strong), with 0 of its 5 reads pointing up. On the daily chart it is bullish. Compass reads “Higher timeframes down” across the 15-minute to daily timeframes. This describes the trend at the last close; it isn’t a forecast.

### Is CNC above its 50-day and 200-day moving averages?

At the Nov 20, 2026 close of $63.78, CNC was 5.4% below its 50-day moving average ($67.41) and 11.3% above its 200-day moving average ($57.30).

### What is CNC’s 52-week high and low?

Over the past year CNC has traded between $31.63 and $78.08, and it closed 69% of the way up that range.

### How much does CNC move in a day?

Over the last 14 sessions its average daily range (average true range) was 6.1% of its price, about $3.89 a share.

### What is CNC’s average volume?

CNC averaged 6.41M shares a day over the 20 sessions before Nov 20, 2026. That day it traded 7.01M, 1.1 times that average.

### How has CNC stock performed recently?

Measured to the Nov 20, 2026 close, CNC is down 10.5% over the past week, down 10.5% over the past month and down 2.8% over the past three months.

### Did CNC gap up on Nov 20, 2026?

Yes. It opened at $67.00, 2.2% above the prior close of $65.58, and closed at $63.78 (−2.74%).

### How many shares of CNC are in the float?

About 486M shares.

### What is Centene’s market cap?

About $35.28B, from its latest company profile. It is in the Healthcare sector (Medical - Healthcare Plans).

### What is the outlook for CNC stock?

This page doesn’t forecast prices. It shows where CNC stands: the stack bias is bearish, the nearest resistance is $63.91, the nearest support is $63.29, and the live chart above shows how price is reacting to those levels.

## Other Healthcare stocks

- SLS (+156.8%): https://indicatorstack.com/chart/SLS
- MEDS (+84.1%): https://indicatorstack.com/chart/MEDS
- CUE (+68.2%): https://indicatorstack.com/chart/CUE
- MRKR (+54.7%): https://indicatorstack.com/chart/MRKR
- APRE (−53.6%): https://indicatorstack.com/chart/APRE
- SCLX (−48.6%): https://indicatorstack.com/chart/SCLX
- AYTU (+46.2%): https://indicatorstack.com/chart/AYTU
- MIRA (−37.7%): https://indicatorstack.com/chart/MIRA
- SNTI (−36.6%): https://indicatorstack.com/chart/SNTI
- KYNB (−36.3%): https://indicatorstack.com/chart/KYNB

Live chart with the stack’s read on every bar: https://indicatorstack.com/chart/CNC

---

IndicatorStack: on-chart analysis for active traders. LiveChart (https://indicatorstack.com/chart) reads every bar of any US-listed ticker into one held stack bias, the levels to watch and Compass, free. Site guide: https://indicatorstack.com/llms.txt. Today's digest: https://indicatorstack.com/llms-full.txt. Risk Disclosure: https://indicatorstack.com/risk
