Average true range measures how far a ticker typically moves in one bar. It's useful for stops because a 20-cent stop means something very different on a calm large cap and on a fast small cap.
01The two jobs of a stop
A stop has to mark the point where your idea is wrong, and it has to survive ordinary movement. Structure answers the first job: under the level, past the swing low. ATR answers the second, by telling you how much buffer that level needs.
- Entry
- 0.84069:30 AM ET
- Stop
- 0.82491.87% from the entry
- 14-bar ATR
- 0.0090
- Stop distance
- $0.0161.8× the ATR
- Closed at
- 0.8221stop
- Result
- −1.2R−2.2% from the entry
02A worked example
On the 5-minute chart, ATR is 0.25. You're buying a pullback to a level at 41.00. A buffer of half an ATR puts the stop at about 40.87. If you enter at 41.15, the risk is 0.28 a share. With $100 at risk, that allows about 357 shares.
03Common multiples
- Tight, on a clearly defined level: 0.5 to 1 ATR past it.
- Standard, on liquid names: 1 to 1.5 ATR from entry.
- Wider, on thin or volatile names: 2 ATR or more.
LiveChart adjusts for this automatically. The line at the bottom of the stack panel shows the ticker's profile and the ATR multiple being used.
04ATR changes through the day
ATR is often highest at the open and lowest around midday. A stop sized during the first ten minutes could be wider than you need by noon. A stop sized at noon could be far too tight for the following morning's open.
05When the stop is too wide
If a sensible stop makes the reward too small, you have two honest choices: reduce the position size, or skip the trade. Moving the stop closer to make the numbers work only makes it likelier to be hit.
06Round numbers
Stops tend to cluster at round prices and just under obvious lows. Set yours a few cents beyond those points where the arithmetic allows it.