When a level breaks, there are two main ways to get involved. You can enter on the break or wait for a return to the level. The second one is called a retest, and it changes the math in your favor when it comes.
01A worked example
A stock breaks above 25.00, with a logical stop at 24.60 and a target at 26.40.
- Entering on the break at 25.20 risks 0.60 to make 1.20. That's 2R.
- Entering on a retest at 25.05 risks 0.45 to make 1.35. That's 3R.
It's the same trade idea, 15 cents apart, and the reward per unit of risk is 50% higher.
02What a good retest looks like
- Volume dries up on the way back to the level.
- Price holds at or just above the level on a closing basis.
- A bar closes back in the direction of the breakout.
- The stack bias and Next still agree with the side.
03The cost
The strongest breakouts often don't come back. If you only take retests, you'll miss a share of the best moves, and some of the retests you do get will be the ones that fail, because weak breakouts come back more readily than strong ones.
04Handling that trade-off
A common compromise is a small starter on the break, then the balance on the retest. If there's no retest, you still have something on. If it fails, the starter's loss is small.
05When the retest has failed
A close back below the level with expanding volume means the breakout has failed. Failed breakouts can reverse fast, since everyone who bought the break is now trapped. Tripwire marks these failed breaks with an ×. Take your loss promptly, and don't try to buy it again until a new structure has formed.
As always, label break entries and retest entries separately in your journal. It takes around 30 of each before the comparison tells you anything.